Mazak Double Spindle CNC Lathe w/Live Tooling
Model #SQT-15 MS / Serial #117178
Wired 240 / 3-Phase
Fully Serviced Used Machine / All Functions are in good working order s/Chip Conveyor including various other tool holders, boring bars, & lathe attachments.
Extra: Turret has live tooling
Machine comes with 3-Live tool holders, 15 lathe & boring bar tool holders, also equipped with working parts catcher.
Has two (2) Collet Chucks & One (1) Three Jaw Chuck
Full set of manuals
Has Chip Conveyor and also includes various other tool holders, boring bars & lathe attachments.
$16,500.00
Mazak Double Spindle CNC Lathe w/Live Tooling (Pic2)
Mazak Double Spindle CNC Lathe w/Live Tooling (Pic 3)
Colchester Bed Lathe
Model #600 / Serial #2000B/1000
Specs: 3 Phase / 240 or 480 volt power / 8" Throw / 64" Bed
Includes 3 Jaw Chuck, Feed Gear Box & Apron has been rebuilt / Full Parts & Operation Manual
New Starter & Relays
Painted with epoxy sealer and urethane epoxy paint.
Price: $9,800.00
Colchester Bed Lathe (Pic 2)
Colchester Bed Lathe (Pic 3)
DoAll Horizontal Metal Cut-Off Saw w/Auto Feed
Model: #S-280CNC /Serial #700-17102
Specs: 460 Voltage / 3-Phase / 380V Transformer / 117" Band Length
Machine tested & 75% of machine has been sandblasted & freshly painted with epoxy sealer and urethane epoxy paint.
Machine also has six (6) extra new blades
Full Operations & Parts Manual
Price: $4,700.00
DoAll Horizontal Metal Cut-Off Saw w/Auto Feed (Pic 2)
DoAll Horizontal Metal Cut-Off Saw w/Auto Feed (Pic 3)
DoAll Horizontal Metal Cut-Off Saw w/Auto Feed (Pic 4)
LNS Quickload 4FT Bar Feeder
Model #LNS-SA / Serial #18463
Specs: 480v / 220V, 15 AMPs / Bar Diameter Range 8-80mm OR 5/16" to 3 1/8" / 4' Max Length
All new air lines
Includes six (6) Guide Tubes
Full Electrical and Operator Manual Included
Price: $900.00 (Just Reduced from $1,200.00)
LNS Quickload 4' Bar Feeder (Pic 2)
LNS Quickload 4' Bar Feeder (Pic 3)
Bridgeport Mill - 1.5 HP w/ 6" Riser / Movable Chip Guard w/ Spindle Interlock Switch
Power Feed on "X" Axis / Power Feed on Knee Drive
New 1.5 HP Spindle Drive Motor / Variable Speed
New Spindle Bearings
Upper Head Completely Rebuilt
DRO on "X" & "Y" Axis / "Z" Axis with Digital Display
Manual Included
Price: 11,699.00
Bridgeport Mill - 1.5 HP w/ 6" Riser/Moveable Chip Guard w/ Spindle Interlock Switch (Pic 2)
Bridgeport Mill - 2 HP
Power Feed on "X" Axis - AC110V
New Digital "Z" Axis Read Out
2.0 HP Spindle Drive Motor
Variable Speed
Upper Head Completely Rebuilt
Manual Included
Price: $7,500.00
Bridgeport Mill - 2 HP (Pic 2)
Bridgeport Mill - 2 HP (Pic 3)
Snow Pneumatic Tapper
Model #SQT-15 MS / Serial #117178
3-Phase / 240 Volt
Tap Head Included
Riser Plate On Adjustable Table
Works Great
$700.00
Snow Pneumatic Tapper (Pic 2)
